SumiLax SMT Technologies Private Limited

We are a well-known name in the market in offering a wide range of Reflow Oven T960. This is equipped with the crawler-type and five temperature area heating systems, and each temperature area uses independent PID controlling and up-down heating type, can make the inside temperature more accurate and well-proportioned. Moreover, offered range of products is tested on various parameters to follow the ongoing market trends. We assure timely delivery of our offered products.

Features:

• Accurate dimension
• Long functional life
• Highly efficient

Standard Features:

• This machine selects the intelligent level sirocco and rapid infrared heating technology controlling, equipped with special design wind wheel, speed stability and uniform temperature, suit for uninterrupted soldering the LED and BGA components.
• This machine is equipped with the crawler-type and five temperature area heating systems, and each temperature area uses independent PID controlling and up-down heating type, can make the inside temperature more accurate and well-proportioned, just take about 15 minutes can let it heat up to the working temperature from the room temperature.
• Intelligent temperature wave heating type, oversized capacity wave selection, has eight temperature waves can satisfy various welding technological requirements.
• Use programmable technology, preset the temperature wave memory storage function, can complete the whole welding process automatically according to your presetting wave.
• Adopt the thermocouple temperature measurement and add the compensation circuit, make the temperature measurement more accurate, the wave more perfect.
• Use PID intelligent temperature control technology; make the temperature control more accurately. Adopt the imported large current solid-state relay non-contact output can effectively avoid the IC or circuit board damage due to the rapid or uninterrupted warming up, make the whole welding process more scientific safety.
• Transmission system adopt imported frequency conversion motor, PID closed-loop speed, equip with all the import 1:150 turbine speed reducer, smooth operation, speed adjustable range 0-1600mm/min.
• Adopt independent wheel structure and special stainless steel strut, durable wear-resisting runs smoothly, speed precision can reach + 10mm/min.
• Independent cooling zone, to ensure the PCB board of low temperature when the required.
• Friendly human-machine operation interface, perfect LCD display, no need to connect with the PC, can watch the whole repairing process very clearly.
• Ergonomic design, practical and easily operated. Good build quality but at the same time light weight and a small footprint allows the T-960 to be easily bench positioned, transported or stored.

Specifications:

• The heating zone quantity: Upper3/down2
• The length of the heating zone: 960 mm
• The heating type: intelligent level sirocco and rapid infrared heating
• The cooling zone: quantity 1
• Maximum width of PCB board: 300 mm
• The operation direction: left→right
• Delivery Options: Net transmission chain transmission
• The speed of conveyor belt: 0-1600 mm/min
• The power supply: Three phase 5 line 380 V 50/60 Hz
• Peak Power: 4.5 kW
• Heating up time: Around 15 mins
• Temperature control range: Room temperature 350
• Temperature control mode: PID closed-loop control
• Temperature control accuracy: ±3
• PCB temperature distribution deviation: ±2
• Overall Dimensions: 1450×630×470
• Machine Weight: 90 kg

Vitronics-Soltec Reflow Oven – Lead Free 

Make: Vitronics-Soltec, USA

Model: XPM2 820 – Air Configuration

·        8 Heating Zones Top/Bottom, 2 Cooling Zones Top / Bottom

·        Conveyor: Edge Rail & Mesh Belt, Left to Right Transport Direction

·        Inbuilt Thermo couple port for Profiling, Flux Flow Control System

·        IAS system & UPS Power Back up, Auto Chain Lubrication

·        FFC -  Flux Flow Control provides Maintenance free of Blower and Heaters

Country of Import - Korea

Condition of Machine: Machines Used in Clean Room Division and Its Fully Refurbished, Maintained and Calibrated as per Standard

Condition: Refurbished

Vitronics-Soltec Reflow Oven – Lead FreeMake: Vitronics-Soltec, USAModel: XPM 820 – Air to N2 Switching8 Heating Zones Top/Bottom, 2 Cooling Zones Top / BottomConveyor: Edge Rail & Mesh Belt, Left to Right Transport Direction Inbuilt Thermo couple port for ProfilingFlux Flow Control System, IAS system & UPS Power Back upAuto Chain LubricationFFC - Flux Flow Control provides Maintenance free of Blower and Heaters

Clients can avail from us a wide assortment of  Reflow Soldering Machine that is procured from some of the certified vendors of the market.

Specifications:

• Make: PUHUI
• Model: T962A
• Category: Pcb Solder Machines
• Condition: Good
• Vintage: New

Enriched with immense industrial knowledge, we are engaged in offering a technically updated variety of Infrared Economical Reflow Oven that is highly demanded among the patrons for easy operations and high functionality. In their fabrication process world-class quality of raw components are used and these products are available with us in standard and also in modified forms. Moreover, offered products are quality proved in nature and are given as per the requirements of our valuable clients.

Features:

• Sturdy construction
• Compact size
• High reliability

Product Description:

• The INFRARED IC HEATER T962 is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
• A windowed drawer is designed to hold the work-piece, and allows safe soldering techniques and the manipulation of SMDBGA and other small electronic parts mounted on a PCB assembly. The T962 may be used to automatically rework solder to correct bad solder joints, remove / replace bad components and complete small engineering models or prototypes.

Product Features:

• A large infrared soldering area Effective soldering area: 180×235mm, this increases the usage range of this machine drastically and makes it an economical investment.
• Choice of different soldering cycles Parameters of eight soldering cycles are pre defined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
• Special heat up and temperature equalization with all designs Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
• Ergonomic design ,practical and easily operated Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.
• Large number of available functions The T962 can solder most boss-eyed or double-face PCB boards small parts, for example CHIP,SOP,PLCC,QFP,BGA etc.It is the ideal rework solution from single runs to on-demand small batch production.

Technical Specifications:

• Maximum soldering area: 180×235 mm
• Size: 31×29×17 cm
• Packing Size: 36×23×36 cm
• Rated Power: 800 W
• Processing Time: 1~8 min
• Power Supply: AC 220 V/52 Hz
• Net Weight: 6.2 kg
• Gross Weight: 7.5 kg